4 Seasons pothole filler can be used for cracks ranging from ½” on up.

Estimate material needed and assess the situation for proper fill of area.

Remove sand and debris from repair area. Clean visible grease and oil from surface.

If the crack is narrow you will need to reduce the amount of aggregate that you add to the liquid in order to achieve a product thin enough to pour and penetrate deep into the crack.

In this situation, mixing 4 Seasons in a smaller container like a 5 quart pail will work just fine. Start by pouring 2” of liquid into pail.

Mix in slowly, a small amount of aggregate to achieve a pour able consistency. Pour into crack and level off, ensuring that good contact between the edge of the crack and the 4 Seasons product has been made.

Any remaining liquid and aggregate must be used in like manner.

Product initially comes proportioned for successful pothole filling.

Using partial amounts, as in dealing with larger cracks, causes the ratios to be unbalanced. It will not be successful for pothole filling.